Skip to content

Frigidaire Appliance Repair in Rockford, IL

Updated

Short answer

Frigidaire and Electrolux share one major appliance limited warranty: one year from the original date of delivery, repair of the defective appliance with labor included (Electrolux / Frigidaire). On Frigidaire ranges, F10 is thermal runaway, F30 an open temperature probe and F90 to F94 a door lock issue. Range model numbers are usually on the oven's interior side trim or the storage drawer frame.

Independent service. This site and the technicians it connects you with are not affiliated with, endorsed by or authorized by Frigidaire. If your Frigidaire appliance is still under the manufacturer's warranty, contact Frigidaire first: covered repairs go through its own service network.

Warranty

What Frigidaire's warranty covers

The Electrolux / Frigidaire major appliance limited warranty covers the appliance for one year from the original date of delivery: if it fails to be functionally operable due to a defect in materials or workmanship, Electrolux repairs it without charge, labor included, when it was installed, used and maintained per the instructions. The sole remedy is repair (Electrolux / Frigidaire).

Model number

Where to find the model and serial number

  • Range: along the interior side trim of the oven, on the left-side panel with the door open, or on the front frame of the storage drawer
  • Wall oven and microwave: along the interior side trim, door open
  • Cooktop: on the underside of the cooktop base, visible when lifted
  • Source: Frigidaire

Error codes

What Frigidaire error codes mean

Meanings are Frigidaire's own wording, condensed. Codes vary by model, so confirm against your manual.

CodeApplianceWhat Frigidaire says it means
F1Electric rangeShorted keypad. source
F10Range or wall ovenThermal runaway: the oven is detecting higher-than-normal temperatures. Turn it off and let it cool. source
F12Electric rangeMicro identification. source
F13Electric rangeE prompt failure. source
F3, F20, F26Electric rangeCommunication error. source
F30Range or wall ovenOpen probe. Frigidaire suggests a reset by unplugging for 30 seconds or flipping the breaker. source
F31Electric rangeShorted probe. source
F40, F41Electric rangeCooktop lockout. source
F90 to F94Range or wall ovenDoor lock issue. Press UNLOCK; once controls and door lock, cooking functions are unavailable. source

Before you call

Have these ready

  • The full model and serial number from the rating tag (a phone photo is fine)
  • The purchase or delivery date, to check warranty coverage first
  • The exact error code or blink pattern, and when it appears
  • Gas, propane or electric, for ranges and dryers
  • What you have already tried, such as a reset or a cleaned filter

Recalls

Check for a Frigidaire recall

Search the U.S. Consumer Product Safety Commission's recall list for Frigidaire and your appliance type before paying for a repair; recall notices say what remedy the manufacturer offers. See how to check for appliance recalls.

Common questions

Frigidaire repair questions

What does F10 mean on a Frigidaire oven?

Frigidaire calls F10 thermal runaway: the oven is detecting higher-than-normal temperatures. Turn it off and let it cool; if it persists, contact service.

How long is the Frigidaire warranty?

One year from the original date of delivery under the Electrolux / Frigidaire major appliance limited warranty, with labor included for covered repairs.

Where is the model number on a Frigidaire range?

Along the interior side trim of the oven, on the left-side panel with the door open, or on the front frame of the storage drawer.

Frigidaire appliance acting up?

Tell us the Frigidaire model, the error code if there is one, and what it is doing. A local independent technician calls back with a time and a price before any work starts.