Skip to content
Appliance RepairRockford, Illinois

KitchenAid Dishwasher Error Codes: How to Read Them

Updated

Short answer

KitchenAid says F#E# codes and flashing lights on a dishwasher means a fault category and subcategory. Digital models show an F#E# code; flashing-light models blink a two-part sequence with a distinct pause. KitchenAid's common codes: F9E1 long drain, F8E4 water in the drip tray, F7E2 wash motor, F6E1 user interface, H20 not detecting water. KitchenAid's first step: wake the display or count the blinks before and after the pause. For motor and control codes, KitchenAid says to schedule service if the code returns after a power cycle. Dishwasher control boards run $200 to $400 and motors $250 to $600 (2026 cost guide).

What F#E# codes and flashing lights means

In KitchenAid's words, condensed: a fault category and subcategory. Digital models show an F#E# code; flashing-light models blink a two-part sequence with a distinct pause. KitchenAid's common codes: F9E1 long drain, F8E4 water in the drip tray, F7E2 wash motor, F6E1 user interface, H20 not detecting water (KitchenAid).

What KitchenAid says to try

  1. Wake the display or count the blinks before and after the pause.
  2. Power cycle: disconnect the dishwasher from power for 30 seconds.
  3. Follow the specific code's steps.

Unplug the appliance or switch off its breaker before reaching into any part of it. Codes and steps vary by model, so check your manual too.

If the code comes back

For motor and control codes, KitchenAid says to schedule service if the code returns after a power cycle. Dishwasher control boards run $200 to $400 and motors $250 to $600. (Angi, dishwasher repair cost (updated Apr 6, 2026))

Related

All KitchenAid codes on one page: KitchenAid appliance repair. The appliance: dishwasher repair. This site is independent and not affiliated with or authorized by KitchenAid; if the appliance is under warranty, contact KitchenAid first.

Sources: KitchenAid, dishwasher error codes; Angi, dishwasher repair cost (updated Apr 6, 2026)

Quick answers

What does F#E# codes and flashing lights mean on a KitchenAid dishwasher?

KitchenAid says it means a fault category and subcategory. Digital models show an F#E# code; flashing-light models blink a two-part sequence with a distinct pause. KitchenAid's common codes: F9E1 long drain, F8E4 water in the drip tray, F7E2 wash motor, F6E1 user interface, H20 not detecting water.

How do I clear F#E# codes and flashing lights?

KitchenAid's steps: Wake the display or count the blinks before and after the pause. Power cycle: disconnect the dishwasher from power for 30 seconds. Follow the specific code's steps.

What does it cost if F#E# codes and flashing lights keeps coming back?

For motor and control codes, KitchenAid says to schedule service if the code returns after a power cycle. Dishwasher control boards run $200 to $400 and motors $250 to $600.

Keep reading

Rather have someone fix it?

Tell us the appliance, the brand, the model number and what it is doing. A local technician calls back with a time and a price before any work starts.

Call (815) 800-0677See 2026 Prices